You can dilute old thick CA with regular thin CA enabling
you to use the thick CA to the last drop (Usually only a few drops of
the thin CA serves the need)
Fit the
frame in place using T-pins and then using thin ca tack all the joints.
A 22 gauge 1 1/2 inch hypodermic
needle and syringe can be filled by simply drawing it into the syringe exactly like a nurse
would
keeping the CA glue spout clean and clear by keeping them soaked in a
small container of Acetone until ready for use.
Tips for keeping a spout clear
 | Never use instant glue just out of the freezer. Allow time for it to return
to room temp before opening. |
| Never return a bottle that has ever been opened to cold storage. |
| Avoid spraying accelerator in the direction of an exposed spout. |
| Avoid dragging the tip of the spout through wood dust during
application. |
| The more sanding dust in the workshop, the more likely the spout will
clog. |
| Never put pins or paper clips or anything in the spout to keep it
clear. |
| Always cap the bottle during sanding or when the bottle is to be
left for an hour or more. |
